Pandorabox 修改软件源

原创文章，转载请注明出处
https://qiedd.com/

以Newifi3 d2为例，版本R20.3.8

在系统->管理->配置 中修改源

然后将默认软件源替换

src/gz 20.03_core http://downloads.pangubox.com:6380/pandorabox/19.02/targets/ralink/mt7621/packages
src/gz 20.03_base http://downloads.pangubox.com:6380/pandorabox/19.02/packages/mipsel_1004kc_dsp/base
src/gz 20.03_lafite http://downloads.pangubox.com:6380/pandorabox/19.02/packages/mipsel_1004kc_dsp/lafite
src/gz 20.03_luci http://downloads.pangubox.com:6380/pandorabox/19.02/packages/mipsel_1004kc_dsp/luci
src/gz 20.03_mtkdrv http://downloads.pangubox.com:6380/pandorabox/19.02/packages/mipsel_1004kc_dsp/mtkdrv
src/gz 20.03_newifi http://downloads.pangubox.com:6380/pandorabox/19.02/packages/mipsel_1004kc_dsp/newifi
src/gz 20.03_packages http://downloads.pangubox.com:6380/pandorabox/19.02/packages/mipsel_1004kc_dsp/packages
src/gz 20.03_pear http://downloads.pangubox.com:6380/pandorabox/19.02/packages/mipsel_1004kc_dsp/pear

然后SSH连上路由器，在命令行中执行

#获取包信息
opkg update

若你的路由器的 CPU 为 MT7620

则修改为如下

src/gz 18.10_core http://downloads.pangubox.com:6380/pandorabox/18.10/packages/mipsel_24kec_dsp/packages
src/gz 18.10_base http://downloads.pangubox.com:6380/pandorabox/18.10/packages/mipsel_24kec_dsp/base
src/gz 18.10_lafite http://downloads.pangubox.com:6380/pandorabox/18.10/packages/mipsel_24kec_dsp/lafite
src/gz 18.10_luci http://downloads.pangubox.com:6380/pandorabox/18.10/packages/mipsel_24kec_dsp/luci
src/gz 18.10_mtkdrv http://downloads.pangubox.com:6380/pandorabox/18.10/packages/mipsel_24kec_dsp/mtkdrv
src/gz 18.10_newifi http://downloads.pangubox.com:6380/pandorabox/18.10/packages/mipsel_24kec_dsp/newifi
src/gz 18.10_packages http://downloads.pangubox.com:6380/pandorabox/18.10/packages/mipsel_24kec_dsp/packages
src/gz 18.10_pear http://downloads.pangubox.com:6380/pandorabox/18.10/packages/mipsel_24kec_dsp/pear

示例：安装Libpcap

命令行中执行

#安装libpcap
opkg install libpcap

你也可以先下载libpcap，然后使用winscp上传至/tmp目录，然后
官方下载 备份

cd  /tmp
opkg install libpcap_1.7.4-1_mipsel_1004kc_dsp.ipk